How to cool down your Android phone: apps and other ways
There are quite a few risks that can have a negative impact on your mobile phone. One of them is overheating of the box. It happens for a variety of reasons and can eventually lead to appliance failure, not to mention the fact that using a hot appliance isn’t very pleasant. In this sense, we explain how to cool down your Android phone and what are the causes of its overheating.
Causes of overheating
To solve the problem associated with the exhaustion of mobile phones, it is necessary to identify the causes that preceded it. Mobile technology experts identify the following factors:
- elevated ambient temperature;
- place the unit on a hot surface;
- high level of screen brightness;
- operation of a large number of programs;
- Poor software optimization;
- Interaction with the device during charging.
Once all possible causes have been explored, they can be roughly divided into external and internal. The first type of factors can solve the problem by changing the environment, while the second type is by changing the settings of the mobile phone. Next, we suggest examining each cause individually, identifying the remedy for it.
Ways to reduce overheating
Since overheating is due to various causes, there is no single method to solve the problem. Whether or not you are 100% sure what is causing the temperature of your case to rise, consider all your options, and one of them will surely help you cool down your mobile phone.
temporary closure
The first thing to do when overheating occurs is to temporarily turn off the mobile phone. This will help stop any processes running on the device, which will ultimately reduce the temperature of the case.
In this case, the cause of the problem is considered to be the presence of a large number of programs running in the background. After a few minutes, when the temperature of the phone returns to normal, the device can be turned on again. If there is no positive change, consider alternative options to lower the temperature readings.
Room temperature change
If your mobile phone case is still hot after you turn it back on, there is a tricky way to fix the problem, as the most reliable way to cool down is to change the ambient temperature. Temporarily place your gadget in a cooler space, but don’t overdo it: You don’t need to resort to a fridge or freezer, but forcibly avoiding heat and direct sunlight is a good way to keep the case temperature cool. be more acceptable.
Light reduction
It is quite common for mobile phones with IPS screens to overheat when the owner of the device uses it for a long time in high brightness mode. This problem is also common to many Samsung models with AMOLED panels. To correct the situation, it is necessary to reduce the brightness to a medium setting, or better – activate the option of automatic brightness through the control center (the notification shade). Then the screen brightness will automatically adjust to the ambient light, avoiding excessive increases.
Deactivation of unused programs
Therefore, the main reason for high enclosure temperatures in a room temperature situation is the use of a large number of programs.
To avoid overheating, it is recommended to close unnecessary processes, which is helped by the running application list feature.
The list can be accessed by swiping from the bottom of the screen to the center, or by pressing the corresponding button when using the virtual control tools. In general, the same thing happens when the device is restarted. So if the temperature doesn’t drop, you’ll need to disable some apps from running in the background:
- Open the phone settings.
- Go to “Applications”.
- Select the program that interests you.
- Open the Permissions tab.
- Uncheck the “Allow it to run in the background” option.
It is important. By preventing apps like messengers from running in the background, you risk missing an important notification of an incoming message or call.
By minimizing the number of background processes, the load on your mobile phone’s hardware is reduced. In this way, the device starts to work at a lower speed, and the processor (and therefore the case) does not heat up.
Function shutdown
Regardless of whether you use an Honor, Samsung or Xiaomi mobile phone, the device may overheat even after closing background processes. Here it is important to understand that the processor is not only being stressed by the running applications, but also by the gadget’s various sensors, including:
- Wifi;
- Mobile Internet;
- Bluetooth;
- GPS.
The temperature is the most affected by the constant operation of the locating function. It can be disabled through the notification bar. It is also recommended not to use mobile data. This recommendation is relevant if you are in a place with poor signal reception.
Switch to power saving mode
If manual methods to limit background processes and other features don’t help you deal with high temperatures, you can use Android’s built-in option. Mobile Phones support different modes of operation. And, if you select “Energy saving”, the processor and therefore the case will heat up less. To perform the operation you will need:
- Open device settings.
- Go to “Power and performance”.
- Activate the “Energy saving” option.
Activating this mode greatly reduces the load on the hardware components of the gadget. In this case, the mobile phone not only heats up less and maintains its charge for a longer time, but also performs basic tasks with greater difficulty. Therefore, power saving mode should be considered as a last resort if you are willing to put up with occasional lags and general device slowdowns.
Replacing the box and the loading surface
Heat dissipation plays a special role when using an appliance. If you pick up your mobile phone from a table in direct sunlight, it is not surprising that the case becomes hot. Avoid placing your phone on overheated surfaces so you don’t have to cool down the device itself.
Also, carefully choose accessories for your device, specifically the case. If you use a case that is too thick, the heat does not dissipate from the mobile phone, which causes the gadget to overheat. Try to use your mobile phone without the case and you will notice how quickly the temperature of the case drops.
Update phone software
Many of the problems associated with excessive body temperature are due to poor optimization. To avoid this type of problem, you should regularly update the software according to the instructions:
- Open device settings.
- Go to “About phone” and then to “Software update”.
- Press the “Check for updates” button.
- If an update is detected, alternately press “Download” and “Install”.
If the phone does not find the update after pressing “Check for updates”, then you already have the current version of the firmware installed. If you confirm the installation of the update, the phone will reboot, which will take 5-10 minutes depending on the size of the device and the power of the device.
At the same time, do not forget that not only the firmware needs to be updated, but also the applications. This operation is done through the Google Play Market or by manually reinstalling the applications using APK files. Please update the software regularly, and then the case will keep fresh.
Check for viruses
The heating can be caused by malware that is running but does not appear in the list of running applications. In this situation, the best cooler is the antivirus. This type of software looks for malware and removes it. As an antivirus, it is suggested that you consider:
- Kaspersky Internet Security;
All the programs shown work on a similar principle, so it makes no sense to dwell separately on the algorithm of actions. Just launch the desired application, start the scan and confirm the removal of the malicious files at the end of the scan.